TY - JOUR AU - Riaz, Ali AU - Ibrahim, Adnan AU - Bashir, Muhammad Sohail AU - Abdullah, Muhammad AU - Shah, Ajmal AU - Quddus, Abdul PY - 2022/07/15 Y2 - 2024/03/29 TI - Convection Heat Transfer from Heated Thin Cylinders Inside a Ventilated Enclosure JF - Semiconductor Science and Information Devices JA - semicond. sci. and inf. n.a. VL - 4 IS - 2 SE - Article DO - 10.30564/ssid.v4i2.4719 UR - https://journals.bilpubgroup.com/index.php/ssid/article/view/4719 SP - 10-16 AB - <p>Experimental study was conducted to determine the effect of velocity of axial fan, outlet vent height, position, area, and aspect ratio (h/w) of ventilated enclosure on convection heat transfer. Rectangular wooden ventilated enclosure having top and front transparent wall was made up of Perspex for visualization, and internal physical dimensions of box were 200 mm × 200 mm × 400 mm. Inlet vent was at bottom while outlet vents were at the side and top wall. Electrically heated cylindrical heat source having 6.1 slenderness ratio was fabricated and hanged at the centre of the enclosure. To calculate heat transfer rates, thermocouples were attached to the inner surface of heat source with silica gel. Heat source was operated at constant heat flux in order to quantify the effect of velocity of air on heat transfer. It was observed that average Nusselt number was increased from 68 to 216 by changing velocity from 0 to 3.34 m/s at constant modified Grashof number i.e. 5.67E+09. While variation in outlet height at the front wall did not affect heat transfer in forced convection region. However, Nusselt number decreased to 5% by changing the outlet position from top to the front wall or by 50% reduction in outlet area during forced convection. Mean rise in temperature of enclosure increased from 8.19 K to 9.40 K by increasing aspect ratio of enclosure from 1.5 to 2 by operating heat source at constant heat flux i.e. 541.20 <em>w/m</em>2.</p> ER -