Study on Correlation Characteristics of Static and Dynamic Explosion Temperature Fields
DOI:
https://doi.org/10.30564/frae.v2i4.1545Abstract
The warheads such as missiles and artillery shells have a certain speed of motion during the explosion. Therefore, it is more practical to study the explosion damage of ammunition under motion. The different speeds of the projectiles have a certain influence on the temperature field generated by the explosion. In this paper, AUTODYN is used to simulate the process of projectile dynamic explosion. In the experiment, the TNT spherical bare charges with the TNT equivalent of 9.53kg and the projectile attack speed of 0,421,675,1020m/s were simulated in the infinite air domain. The temperature field temperature peaks and temperature decay laws at different charge rates and the multi-function regression fitting method were used to quantitatively study the functional relationship between the temperature and peak temperature correlation calculations of static and dynamic explosion temperature fields. The results show that the temperature distribution of the dynamic explosion temperature field is affected by the velocity of the charge, and the temperature distribution of the temperature field is different with the change of the charge velocity. Through the analysis and fitting of the simulation data, the temperature calculation formula of the static and dynamic explosion temperature field is obtained, which can better establish the relationship between the temperature peak of the static and dynamic explosion temperature field and various influencing factors, and use this function. Relational calculations can yield better results and meet the accuracy requirements of actual tests.
Keywords:
Model building; Numerical simulation; Data analysis; Correlation function establishmentReferences
[1] Meng Bo. Research on dynamic explosion shock wave test and key technology [D]. North University of China, 2017.
[2] Wang Jie. Research on the Testing and Evaluation Method of the Damage Power of a Cloud Explosion [D]. Nanjing University of Science and Technology, 2016.
[3] Xing Li, Research on storage temperature measurement technology of explosion temperature field based on thermocouple, 2009, Nanjing University of Science and Technology.
[4] Tian Peipei et al. Temperature field test of temperature and pressure bomb explosion based on infrared camera. Infrared Technology, 2016. 38 (03): 260-265.
[5] Wu Meng. Research on numerical simulation of thermal effects of aerial explosion and thermal damage assessment [D]. Nanjing University of Science and Technology, 2013.
[6] Zhang Rulin, Cheng Xudong, Zhang Yanmei, Jia Juanjuan. Numerical simulation experimental research on the action of airborne shock wave [J]. Experimental Technology and Management, 2017, 34 (02): 110-115.
[7] Cheng Yuteng. Simulation and Experimental Study of Explosive Shock Wave of Warm Pressure Explosive in Different Environments [D]. Nanjing University of Science and Technology, 2017.
[8] Jiang Haiyan, Li Zhirong, Zhang Yulei, Su Jianjun.Study on the characteristics of airborne shock wave of sports charges [J] .Chinese Journal of High Pressure Physics, 2017,31 (03): 286-294.
[9] Xue Feng et al. Simulation analysis of explosive shock response of pyrotechnic products based on AUTODYN. Missile and Space Vehicle Technology, 2018 (02).
[10] Xue Feng, Zhang Gang, Wang Fei, Han Ming, Yang Zeyu. Simulation Analysis of Explosive Response of Explosive Device Based on AUTODYN [J]. Missiles and Space Vehicles, 2018 (02): 115-120.
[11] Wu Sai, Zhao Junhai, Zhang Dongfang, Wang Juan. Numerical analysis of explosion shock waves in free air [J]. Engineering Blasting, 2019, 25 (03): 16-31.
[12] Yao Chengbao, Wang Hongliang, Pu Xifeng, Shou Liefeng, Wang Zhihuan. Numerical simulation of ground reflection of strong explosion shock waves in the air [J / OL]. Explosion and Shock: 1-9 [2019-09-20].
[13] Chen Longming, Li Zhibin and Chen Rong, Study on Shock Wave Characteristics of Dynamic Burst of Charges. Explosion and Shock: page 1-10.
Downloads
Issue
Article Type
License
Copyright and Licensing
The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.
Frontiers Research of Architecture and Engineering publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Frontiers Research of Architecture and Engineering agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.
License Policy for Reuse of Third-Party Materials
If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.
Journal Policies on Data Sharing
We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.