Study on Quality Control of Concrete Raw Materials in Road and Bridge Construction

Authors

  • Suqin Han Shandong Transport Vacational College
  • Xiuyong Ni Shandong Transport Vacational College
  • Ruimin Huang Shandong Transport Vacational College

DOI:

https://doi.org/10.30564/frae.v4i1.3118

Abstract

The main material of concrete is a construction building material composed of water and mineral mixture and cement and chemical additives in the corresponding proportion and below the standard. In the process of making concrete material, slurry and cement are needed to mix, then cement slurry and sand are mixed into mortar according to the corresponding proportion, and aggregate is added to mortar to form concrete building material. In the process of concrete preparation, the most important construction link is mixing, which needs to be fully stirred to make the performance of concrete meet the construction needs. In the process of concrete construction technology development, both mix ratio and production technology have become more and more mature, but there are still some problems, which have an impact on the quality of concrete. Therefore, this paper discusses the quality control of concrete raw materials according to the construction process of road and bridge.

Keywords:

Concrete raw materials; Road and bridge engineering; Quality control

References

[1] Zhang Weifeng. A Study on Quality Control Technology of Concrete Raw Materials in Construction of Road and Bridge [J]. China Jiangsu Science and Technology Information 2014 (020):47-4749.

[2] Feng Qiang. A Study on Quality Control Technology of Concrete Raw Materials in Construction of Road and Bridge [J]. China Research on the Theory of Urban Construction: electronic version, 2015(22).

[3] Wei Dianyu. Discussion on Quality Control of Concrete Raw Materials in Construction of Road and Bridge [J]. China Science and Technology Expo, 2012(14):81.

[4] Han Ying. A Study on Quality Control Technology of Concrete Raw Materials in Construction of Road and Bridge [J]. China Theoretical Research on Urban Construction (Electronic Edition),2014 (036):639.

[5] right Jian Ying. A Study on Quality Control Technology of Concrete Raw Materials in Construction of Road and Bridge [J]. China Economic and technical cooperation information (11):80.

[6] Yang Shengcheng. Analysis on Quality Control of Concrete Raw Materials during Construction of Road and Bridge [J]. SME Management and Technology,2011.

[7] Jin Hailong. Research on quality control of concrete raw materials in road and bridge construction [J]. Jiangxi building materials, 2014 (09): 150.

[8] Zhang Yanbo. Quality control of concrete raw materials in road and bridge construction [J]. Science and technology and enterprise, 2014 (08): 195.

[9] Yan Zhenliang, Ren Jindian. On quality control of concrete raw materials in road and bridge construction[J]. Urban architecture, 2013 (12): 264.

[10] Li Yuanzong. Quality control of concrete raw materials in bridge construction [J]. Transportation world (construction and maintenance. Machinery), 2013 (05): 226-227.

[11] Kuang Guoqiang. Analysis on quality control of concrete raw materials in road and bridge construction [J]. Sci tech information, 2011 (18): 62.

[12] Yang Shengcheng. Analysis on quality control of concrete raw materials in road and bridge construction[J]. Management and technology of small and medium sized enterprises (next issue), 2011 (04): 82.

Downloads

Issue

Vol. 4 , Iss. 1 (April 2021)

Article Type

Articles

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Frontiers Research of Architecture and Engineering publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Frontiers Research of Architecture and Engineering agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.