Cognition, Application and Discussion on Shaped Charge Hydraulic Smooth Blasting Technology

Authors

  • Xiuyong Ni Shandong Transport Vocational College
  • Suqin Han Shandong Transport Vocational College
  • Peng Li Shandong Transport Vocational College
  • Xiwu Wei Shandong Transport Vocational College

DOI:

https://doi.org/10.30564/frae.v4i2.3122

Abstract

In the past, the main method of tunnel excavation in China was drilling and blasting, but the biggest shortcoming of the traditional drilling and blasting method is that it is easy to cause serious overexcavation and underexcavation. At the same time, the operation cycle time of this method is long, which leads to a serious waste of resources. Not only that, a large number of toxic gases and dust produced after blasting also do harm to the health of construction workers. So this is an urgent need for a new construction technology to solve this worldwide problem. In this situation, the leading experts in the field of tunnel, "The survey and design master of China" Shi Yuxin, Liu Pei, and well known expert in explosion field, yan-sheng ding, professor Chen Chengguang and Gu Yicheng, the experts group, cooperate with The Fifth Branch of China Railway 18th Bureau in northwest project management department, developed a new technology. This technology has passed the appraisal of scientific and technological achievements organized by Tianjin Science and Technology Commission, which is shaped hydraulic smooth blasting technology. The comprehensive evaluation of the technology is "international leading" level.
This paper is mainly aimed at the drawbacks of drilling and blasting construction,combined with the author's cognition and discussion on the introduction of the new technology of cumulative hydraulic blasting and the practical application effect in the tunnel excavation process of the fourth company of China Railway 14th Bureau Group in the second division of the 9th bid section of Zhangjihuai Railway in Huainan Province.

Keywords:

Shaped energy tube parameters and principle; Technical points; Technical effect

References

[1] Cheng Guihai, Zhang Qinbin, Tang Chunhai.Application of digital electronic detonator in blasting excavation of high slope[J].Chemical Minerals and Processing,2018,47(8):52-55.

[2] Wang Xuguang.Blasting Design and Construction[M].Beijing: Metallurgical Industry Press, 2011

[3] Qin Jianfei.Integrated Technology of Double Accumulated Energy Pre-splitting and Smooth Blasting [M].Beijing: China Water Resources and Hydropower Press, 2014.

[4] Zhang Qinbin, Cheng Guihai, Xu Zhonghui.Water Pressure Directional Blasting of Jiamuna Bridge and Its Numerical Simulation[J].Explosion and Shock Waves,2019,39(6):136-143.

[5] Zhang Xiongzhe.Characteristics and application of non-Newtonian fluids [J].China New Communications, 2018,20(7):241-242.

[6] Shen Xiancai.Application analysis of new technology of water pressure smooth blasting for underground tunnel in subway[J].Railway Construction Technology, 2017,5(5):102-105,123.

[7] Zhang Ruizhi, Li Dechao.Modern Blasting Technology at Home and Awide -- Shaped Charge Blasting Technology[J].Knowledge Economy,2009,11(11):97-98.

[8] Zhou Yiling, Liu Pengzhou,Li Lifa.Application research of shaped charge water pressure smooth blasting technology in Guanshan tunnel construction [J].Construction Technology, 2018,47(16):44-48.

[9] Zhang Qinbin, Cheng Guihai, Xu Zhonghui.Reliability Analysis of Large-scale Initiating Network in Engineering Blasting [J].Science Technology and Engineering, 2018,18 (11):237-241.

[10] Lu Wen,Li Shilu, Zhang Zhicheng.Study on Blocking Mechanism of Blast-hole in Borehole Blasting [J].Explosive Materials,2001,18(1):26-29.

[11] PENG Yan,LU Binghai, JI Hongbo.Application and prospect of non-Newtonian fluid materials in industrial field [J].Light Industry Machinery,2014,32(1): 109-114.

[12] Yao Yong, He Chuan, Tian Zhiyu.Field Test and Analysis of Blasting Vibration in Small Clear Distance Section of Zipingpu Tunnel[J].Sichuan Building Science Research,2009,35(2):262-265.

Downloads

Issue

Vol. 4 , Iss. 2 (October 2021)

Article Type

Articles

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Frontiers Research of Architecture and Engineering publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Frontiers Research of Architecture and Engineering agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.