Preparation and Optimization of Mix ratio for C50T Girder Manufactured Sand and Concrete

Authors

  • Honghong Ye Yunnan Construction and Investment Holding Group Co., Ltd.
  • Delin Zeng Yunnan Construction and Investment Holding Group Co., Ltd.
  • Yong Yang Yunnan Construction and Investment Holding Group Co., Ltd.
  • Xingbo Fan Yunnan Construction and Investment Holding Group Co., Ltd.
  • Wei Wang Yunnan Construction and Investment Holding Group Co., Ltd.
  • Pingbo Zao Yunnan Construction and Investment Holding Group Co., Ltd.
  • Zhusheng Yang Yunnan Construction and Investment Holding Group Co., Ltd.

DOI:

https://doi.org/10.30564/frae.v4i2.3452

Abstract

Considering actual construction conditions of Binchuan-Heqing Highway, this paper provides the C50 mix ratio conforming to engineering requirements by strictly controlling the quality of raw materials, optimizing the design of mix ratio scientifically, preparing superior C50 concrete 0 with manufactured sand, and optimizing the concrete mix ratio based on the adjustment of fly ash replacement, water-cement ratio, polycarboxylate-type water reducer mixing amount, sand ratio, etc. The result indicates that, the water-cement ratio has a great influence on the concrete strength, and if the ratio of coal ash is high in the binding material, the early compressive strength of the concrete will increase slowly.

Keywords:

Concrete; Mix ratio; Strength; Water-cement ratio

References

[1] JTG/T 3650-2020, Technical Regulation on the Construction of Highway Bridges and Culverts[S].

[2] Xu Jian, Cai Jiwei, Wang Jiliang and Zhou Mingkai. Current Research Status of Manufactured Sand and Manufactured Sand Concrete [J]. Science and Technology of Overseas Building Materials, 2004, 25(3).

[3] Guan Aijun, Wang Jiliang, and Zhou Mingkai. Research on the Preparation and Application of C50T Diabase Concrete [J]. Highway, 2004, (5).

[4] Li Xinggui. Use of Man-made Sand with High Content Stone Powder in Concrete [J]. Journal of Building Materials, 2004, 7(1).

[5] NevilleAM, Written. Li Guopan and Ma Zhenyong, Translated. Performance of Concrete [M]. Beijing: China Architecture & Building Press, 1983.

Downloads

Issue

Vol. 4 , Iss. 2 (October 2021)

Article Type

Articles

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Frontiers Research of Architecture and Engineering publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Frontiers Research of Architecture and Engineering agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.