The Results of Research to Determine the Parameters of Hardening Working Area of the Gin and Linter Grates

Authors

  • Mirsolikh Agzamov Department of Technological Machines and Equipment, Tashkent Institute of Textile and Light Industry
  • Rakhmatov Mashkhur Bakhtiyarovich Department of Technological Machines and Equipment, Tashkent Institute of Textile and Light Industry
  • Mirkhosil Mirsalikhovich Agzamov Department of Technological Machines and Equipment, Tashkent Institute of Textile and Light Industry

DOI:

https://doi.org/10.30564/jmer.v2i2.1574

Abstract

The article provides substantiation of the choice of the quenching parameters for the working zone of gin and linter grates and the quenching parameters. The results of bench and industrial tests of the grate with a hardened working zone are also given.

Keywords:

Cotton fiber; Processing of raw cotton; Cotton ginning; ginning machine; Gin and linter grates; Quenching of grates; Steel grates; Hardening with high frequency current (HFC)

References

[1] Makhkamov R.G.. The study of the surfaces of the working bodies of cotton machines and the optimization of their parameters in order to improve the quality of the fiber. Moscow, Abstract of doctoral dissertation, 1974.

[2] Ismailov A.A., Makhkamov R.G., Ibragimov A.S., Agzamov M.. Investigation of the wear of various types of genre grates. Tashkent, J. Problems of textiles, № 3, 2005.

[3] Agzamov M.. Agzamov M.M., Madgidov G.F.. Ways for improvement of cotton fiber quality in process of ginning, 2007, 3(3): 34-37.

[4] Agzamov, M.. Studying of new gin stand with small size ginning box. 2007(1): 26-29.

[5] Makhkamov R.G., Agzamov M.. Sampling quenching parameters of ginning and linter grid bars. , 2006, 3(2): 101-104.

[6] Agzamov, M.M., Yunusov, S.Z., Gafurov, J.K.. On the technological development of cotton primary processing, using a new drying-purifying unit. IOP Conference Series: Materials Science and Engineering, 2017, 254 (8): 082017.

[7] Siti A. Ismail, Guangnan Chen, Craig Baillie, Troy Symes. Energy uses for cotton ginning in Australia. Biosystems Engineering, 2011, 109(2): 140-147.

Downloads

Issue

Vol. 2 , Iss. 2 (September 2019)

Article Type

Articles

License

Copyright © 2020 Mirsolikh Agzamov, Rakhmatov Mashkhur Bakhtiyarovich, Mirkhosil Mirsalikhovich Agzamov

Creative Commons License

This is an open access article under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License.