View Vol. 3 ,  Iss. 1 (March 2020)

Journal of Mechanical Engineering Research

ISSN: 2630-4945 (Online)

Vol. 3 , Iss. 1 (March 2020)


  • Numerical investigation on heat transfer enhancement inside a rectangular microchannel with vortex generator using TiO2, Cuo-water nanofluids

    Arash Behaeen, Mohammad Nimafar

    Article ID: 1568
    563  (Abstract) 42  (Download)


    One of the innovative ways to improve heat transfer properties of heat exchangers, is using nanofluids instead of traditional fluids. Due to presence of metal and oxides of metal particles in nanofluids structure, they have better potential in different environments and conditions than conventional fluids and having higher thermal conductivity causes improvements in heat... More

  • Best Determined Position of Vents Based on Jet Cooling Model

    Na Huang, Yuhan Sun, Xiangjie Wu

    Article ID: 1663
    415  (Abstract) 32  (Download)


    In some data centers, cold air is required to act on the cabinet to achieve cooling requirements, and the mixing of cold air and hot air reduces the utilization efficiency of cold air. In order to solve this problem, a jet cooling model is established to solve the optimal position of the outlet through the... More

  • Development Of Shape Memory Alloy Based Quarter Car Suspension System

    Sathish Kumar Palaniappan, Rajasekar Rathanasamy, Sivasenapathy Chellamuthu, Samir Kumar Pal

    Article ID: 1716
    416  (Abstract) 52  (Download)


    It is well-known that suspension systems plays a major role in automotive technology. Most of the today’s vehicle applies a passive suspension systems consisting of a spring and damper. The design of automotive suspension have been a compromise between passenger comfort, suspension travel and road holding ability. This work aims in reducing the suspension... More

  • An Experimental Study of Surface Improvement in FDM Parts by Vapor Treatment Process

    Mayank Prajapati, Sandeep Rimza

    Article ID: 1681
    530  (Abstract) 66  (Download)


    Fused deposition modeling (FDM) is one of the most adaptable additive manufacturing method owing to the cost-effectiveness and environment-friendly nature. However, FDM technique still possesses major difficulties in terms of poor surface quality because of adding layer by layer manufacturing process for the prototypes. It is desirable to explore an efficient technique for FDM parts... More