The Dynamic Simulation of Rotary Inertia on Light vehicle-Slope I

Authors

  • Run Xu Gyeongsang National University, Metallurgical Engineering Department, Gyeongsang nam-do，Chinju city
  • Boyong Hur Gyeongsang National University, Metallurgical Engineering Department, Gyeongsang nam-do，Chinju city

DOI:

https://doi.org/10.30564/jmer.v3i2.1800

Abstract

According to formula we can simulate their driven force and acceleration on the slope. The mechanical formula is used to obtain force and theoretical dynamics in the slope. The driven force decreases when rotation increases. When power increases the acceleration increases. it reduces when its weight raises. It is found that the a will decrease as slope becomes high from 5 to 11° to 22°, which fit the formula too. Meantime as the radius is high from 0.3m to 0.4m to 0.47m a will be low. The needed force will increase as the slope decline becomes big at the same power.

Keywords:

Simulation; Dynamic; light vehicle；Acceleration；turn bending; driven force；torque；rotation；slope

References

[1] Lianggui Pu, Guoding Chen, Liyan Wu. Mechanical Design[M]. Advanced Education Publisher, 2015, 24: 30.

[2] Shijie Fang, Yaoguang Qi. Mechanical Optimization Design[M]. Machinery Industry Publisher, 2003: 11.

[3] W S Peng, Z M Li, H l Huang. Mechanical Design[M]. Advanced Education Publisher, 2008: 195-196.

Downloads

Issue

Vol. 3 , Iss. 2 (September 2020)

Article Type

Articles

License

Copyright © 2020 Run Xu, Sugun Lim

Creative Commons License

This is an open access article under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License.