The Reform of Elastic-plastic Mechanics Teaching for Petroleum Engineering Related Majors

Authors

  • Yanfei Chen College of Mechanical and Storage and Transportation Engineering, China University of Petroleum (Beijing)
  • Tongjing Xia College of Mechanical and Storage and Transportation Engineering, China University of Petroleum (Beijing)
  • Ye Zhang College of Mechanical and Storage and Transportation Engineering, China University of Petroleum (Beijing)
  • Lulu Li College of Mechanical and Storage and Transportation Engineering, China University of Petroleum (Beijing)
  • Mingchang He College of Mechanical and Storage and Transportation Engineering, China University of Petroleum (Beijing)
  • Hong Zhang College of Mechanical and Storage and Transportation Engineering, China University of Petroleum (Beijing)

DOI:

https://doi.org/10.30564/ret.v3i4.2316

Abstract

“Elastic-plastic Mechanics” is an important course for undergraduates and postgraduates of general engineering majors. However, the theoretical derivation of equations is complex, and the connection with engineering practice is inadequate. Therefore, teaching becomes difficult and boring for a number of students. Firstly, this paper introduces the importance of Elastic-plastic Mechanics for petroleum engineering related majors. Based on the recent teaching experience, the teaching reform of Elastic-plastic Mechanics course is carried out focusing on teaching method and learning content, and a discussion teaching mode based on students’ independent discussion and engineering cases is formed. Remarkable results have been achieved in improving students’ learning efficiency and classroom teaching effect. Furthermore, students’ comprehensive ability of independent innovation and practice is enhanced.

Keywords:

Elastic-plastic mechanics; Petroleum engineering; Seminar teaching; Practice teaching

References

[1] Yang Guitong. Introduction to elastic-plastic mechanics [M]. Beijing: Tsinghua University Press, 2004:7-40.

[2] Lin Gaoyong, et al. Experience in bilingual teaching of elastic-plastic mechanics [J]. Journal of Hunan Medical University (SOCIAL SCIENCE EDITION), 2008,10 (1): 224-225.

[3] Yang Haibo, et al. A concise course of elasticity and plasticity [M]. Tsinghua University Press, 2011:13-40.

[4] He Lijun, et al. Seminar Teaching: the new trend of Higher Education [J]. Heilongjiang Higher Education Research, 2006, (05): 145-147.

[5] Guo Hanmin. Some thoughts on exploring Seminar Teaching [J]. Journal of Social Sciences, Hunan Normal University, 1999 (02): 109-112.

[6] Gu Hong, et al. Reform and practice of graduate course teaching methods [J]. Journal of Beijing University of Technology (SOCIAL SCIENCE EDITION), 2003, (4).

[7] Zhou Bo, et al. Practice and exploration of the curriculum reform of elastic-plastic mechanics for postgraduates [C] //academic conference of mechanics society of seven northern provinces and cities, 2016.

[8] Naumenko K,Altenbach H.Plane Stress and Plane Strain Problems[M]//Modeling High Temperature Materials Behavior for Structural Analysis. 2019.

[9] Det Norsk Veritas. Submarine Pipeline Systems.[J]. DNV OS-F101, 2000, 24:45-53.

[10] T, Inoue. Introduction to Solid Mechanics 4.Yield Criteria and Constitutive Equations of Elastic-Plastic Material[J]. Journal of the Society of Materials Science Japan, 1979.

[11] Newman J C J , Loss F J . Elastic-plastic fracture mechanics technology[M]. ASTM, 1985.

[12] Williams J G.Introduction to elastic-plastic fracture mechanics[J]. European Structural Integrity Society, 2001, 28(28):119-122.

[13] Shen Maoding, Jiangbo. Geological hazards and prevention measures of the west section of the second West Pipeline Project [C] //China oil and gas pipeline safety operation and storage innovation technology forum. 2010.

[14] Shi Yuqin, Zhou Hongmei. Status quo and progress of large storage tank design. [J]. Science and technology information, 2012,07:41.

Downloads

Issue

Vol. 3 , Iss. 4 (October 2020)

Article Type

Articles

License

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Review of Educational Theory publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Review of Educational Theory agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.