View Vol. 1 ,  Iss. 2 (October 2019)

Electrical Science & Engineering

ISSN: 2661-3247 (Online)

Vol. 1 , Iss. 2 (October 2019)

Articles

  • Genetic Algorithm Optimization Model for Determining the Probability of Failure on Demand of the Safety Instrumented System

    Ahmed H. Aburawwash, Moustafa Mohammed Eissa, Azza F. Barakat, Hossam M. Hafez
    1-14

    Article ID: 994
    945  (Abstract) 59  (Download)

    Abstract:

    A more accurate determination for the Probability of Failure on Demand (PFD) of the Safety Instrumented System (SIS) contributes to more SIS realiability, thereby ensuring more safety and lower cost. IEC 61508 and ISA TR.84.02 provide the PFD detemination formulas. However, these formulas suffer from an uncertaity issue due to the inclusion of uncertainty sources,... More

  • Adaptive Noise Cancellation Algorithms Implemented onto FPGA-Based Electrical Impedance Tomography System

    Marlin Ramadhan Baidillah, Zengfeng Gao, Al-Amin S Iman, Masahiro Takei
    15-25

    Article ID: 1043
    490  (Abstract) 47  (Download)

    Abstract:

    Electrical Impedance Tomography (EIT) as a non-invasive of electrical conductivity imaging method commonly employs the stationary-coefficient based filters (such as FFT) in order to remove the noise signal. In the practical applications, the stationary-coefficient based filters fail to remove the time-varying random noise which leads to the lack of impedance measurement sensitivity. In this paper, the... More

  • Roust Power System Stabilizer Design Using Kharitonov’s Theorem: A Case Study

    Hisham Soliman, Mohammed Albadi, Hamood Al-Sheriyani, Hadhifa Al-Azakawi, Ali Al- Qutaiti
    26-31

    Article ID: 1187
    1053  (Abstract) 42  (Download)

    Abstract:

    This paper proposes a robust power system stabilizer(PSS) for a steam synchronous generator in Barka II power station. The PSS should be capable of damping small-disturbance oscillations (inherently existing in power systems due to e.g. load changes, lines switching...etc.) within a certain settling time for different load conditions. Also, the proposed PSS must have the... More

  • Optimal PV Allocation & Minimal tap-Changing Transformers Achieving Best Distribution Voltage Profile & Minimum Losses in Active Distribution Networks

    Hisham M. Soliman, Abdelsalam Elhaffar, Mohammed Albadi
    32-36

    Article ID: 1188
    314  (Abstract) 48  (Download)

    Abstract:

    In distribution systems, voltage levels of the various buses should be maintained within the permissible limits for satisfactory operation of all electrical installations and equipment.  The task of voltage control is closely associated with fluctuating load conditions and corresponding requirements of reactive power compensation. The problem of load bus voltage optimization in distribution systems that... More