Efficient Methodology for Design of Industrial Blast Resistant Electrical Substations and Control Buildings

Authors

  • Osama Bedair Senior Consultant, 415-249 Craig Henry Drive, Ottawa, Ontario, Canada

DOI:

https://doi.org/10.30564/jbms.v2i2.2906

Abstract

This paper describes economical strategies to design electrical substations and control buildings that are commonly used at industrial plants. Limited literature addressed design aspects for this class of buildings. Furthermore, little guidelines are available in practice to regulate this type of steel construction.  The first part of the paper overviews the architectural and structural layouts of electrical buildings. Blast resistance requirements for occupied control buildings are also discussed. Simplified multiple degrees of freedom (MDOF) dynamic model is also illustrated that can be utilized for analysis of the blast resistant buildings. The economical aspects and cost savings resulting in using mobile industrial buildings are discussed. The article also highlights the engineering challenges that are encountered in design of mobile electrical facilities. The transportation procedure and design requirements are briefly described. Guidelines are proposed to calculate the center of mass of the building combined with interior equipments. The proposed design concept for electrical and control buildings is cost effective and can be implemented in industry to reduce projects cost.

Keywords:

Industrial buildings, electrical substations, control building, steel modules, mobile buildings, steel design, industrial facilities.

References

[1] Bedair, O. (2020), “Economical Damage Classification Procedure for Blast Resistant Buildings in Petrochemical Plants”, ASCE, Practice Periodical on Structural Design and Construction,25(3),04020020.

[2] - Bedair, O. (2015) "Novel Design Procedures For Rectangular Hollow Steel Sections (RHSS) Subject To Compression, Major & Minor Axes Bending", ASCE, Practice Periodical on Structural Design and Construction , 20, 04014051

[3] - Bedair, O. (2014) “Cost Effective Modularization Strategies for Industrial Facilities Used in Mega Oil&Gas Projects" Recent Patents on Engineering, 8, pp.120-132.

[4] - Bedair,O. (2014) “Rational Design of Pip-Racks Used For Oil Sands and Petrochemical Facilities", ASCE, Periodical on Structural Design and Construction, 20 (2), 04014029.

[5] - Bedair, O. (2014) “Modern Steel Design and Construction Used In Canada's Oil Sands Industry" Journal of Steel Design Construction and Research", 7 (1), pp.32-40

[6] - Bedair, O. (2012) “Interaction of Multiple Pipe Penetrations Used In Mining and Petrochemical Facilities”, Journal of Thin-Walled Structures, 52, 158-164

[7] - Newman, A. M., Rubio, E., Caro, R., Weintraub, A., and Eurek, K. (2010) "A review of operations research in mine planning" Interfaces, 40(3), 222–245.

[8] - Burt, C. & Caccetta, L. (2007) "Match factor for heterogeneous truck and loader fleets", International Journal of Mining, Reclamation and Environment, 21(4), 262–270.

[9] - Alarie, S, and Gamache, M. (2002) "Overview of solution strategies used in truck dispatching systems for open pit mines",International Journal of Surface Mining, Reclamation and Environment, 16(1),59–76.

[10] - Soumis, F., Ethier, J., and Elbrond (1989) "Truck dispatching in an open pit mine. International", Journal of Surface Mining Reclamation and Environment, 3(2), 115–119.

[11] - AISC (2006), “Steel Construction Manual”, 14th Edition. American Institute of Steel Construction, Chicago, USA.

[12] - AISI (2007), “North American Specification for the Design of Cold-Formed Steel Structural Members”, American Iron Steel Institute, Washington DC, USA

[13] - ASCE/SEI 7-10 7 (2010) "Minimum Design Loads and other structures", American Society of Civil Engineers, Virginia, USA.

[14] - AASHTO LRFD Bridge Design Specifications, (2012) American Association of State Highway and Transportation “- Customary US units “ AASTO Publications, Washington.

[15] - CAN/CSA-S136-07 (2007) ” North American Specification for the Design of Cold-Formed Steel Structural Members”, Canadian Standard Steel Association, Mississauga, Ontario.

[16] - CAN/CSA-S16-01 (2010) “Limit states design of steel structures”, Canadian Standards Association, Mississauga, Ontario, Canada

[17] - NRC (National Research Council of Canada). 2010. National building code. Ottawa, ON: National Research Council of Canada

[18] - Eurocode 3: (2005) Design of steel structures Part 1.5: plated structural elements; EN 1993-1-5: 2005.

[19] - Process Industry Practices-PIP STC01015, (2014) "Structural design Criteria", Texas, USA.

[20] - Ziemian, R. (2010) “Guide to Stability Design Criteria for Metal Structures”, 6th edition, John Wiley and Sons Ltd.

[21] - Coughlin AM, Musselman ES, Schokker AJ, Linzell DG. (2010) “ Behavior of portable fiber reinforced concrete vehicle barriers subject to blasts from contact charges” International Journal of Impact Engineering; 37(5): 521-529.

[22] - Remennikov AM. (2003) A review of methods for predicting bomb blast effects on buildings. J Battlefield Technol 6(3):5–10.

[23] - Remennikov AM, Rose TA. (2005) Modelling blast loads on buildings in complex city geometries. Int J Comput Struct;83, 2197–2205.

[24] -US Army Corps of Engineers TM 5-1300 (1990) “Structures To Resist The Effects Of Accidental Explosions”, New York, USA.

[25] -ASCE (2010) “Design of Blast Resistant Buildings in Petrochemical Facilities” ASCE Petrochemical Committee, Task Committee on Blast Resistant Design, New York.

[26] -CSA S850-12, (2017) “Design and Assessment of Buildings Subjected to Blast Loads” Canadian Standard association, Toronto, Canada.

[27] - Process Industry Practices PIP STC 01018 (2014) “Blast Resistant Building Design Criteria”, USA.

Downloads

How to Cite

Bedair, O. (2021). Efficient Methodology for Design of Industrial Blast Resistant Electrical Substations and Control Buildings. Journal of Building Material Science, 2(2), 21–32. https://doi.org/10.30564/jbms.v2i2.2906

Issue

Article Type

Articles