Physicochemical and Thermomechanical Performance of Eco-Friendly Unfired Clay-Biopolymer Composite Bricks

Authors

  • Rachid Et-Tanteny

    Laboratory of Computer Science and Interdisciplinary Physics (LIPI), ENS-Fez, Sidi Mohamed Ben Abdellah University, Fez P.O. Box 5206, Morocco
  • Imad Manssouri

    Team of Innovative Research and Applied Physics, Faculty of Sciences, Moulay Ismail University, Meknes P.O. Box 11201, Morocco
  • Aboubakr Bouayad

    Laboratory of Engineering Sciences and Professions, ENSAM, Moulay Ismaïl University, Meknes P.O. Box 15290, Morocco
  • Houssame Limami

    Laboratory of Sustainable Energy Materials, Al Akhawayn University, Ifrane P.O. Box 104, Morocco
  • Amine Azzouzi

    Team of Innovative Research and Applied Physics, Faculty of Sciences, Moulay Ismail University, Meknes P.O. Box 11201, Morocco
  • Bouchta El Amrani

    Laboratory of Computer Science and Interdisciplinary Physics (LIPI), ENS-Fez, Sidi Mohamed Ben Abdellah University, Fez P.O. Box 5206, Morocco
  • Karim El Khadiri

    Laboratory of Computer Science and Interdisciplinary Physics (LIPI), ENS-Fez, Sidi Mohamed Ben Abdellah University, Fez P.O. Box 5206, Morocco

DOI:

https://doi.org/10.30564/jbms.v7i3.7994
Received:26 May 2025 | Revised: 12 August 2025 | Accepted: 2 September 2025 | Published Online: 18 September 2025

Abstract

The rapid growth of the global population, coupled with increasing pollution levels, highlights the urgent need for sustainable and eco-friendly construction materials, such as unfired clay bricks. However, their widespread adoption remains limited due to certain performance drawbacks, particularly in thermal insulation, a critical factor in addressing climate change challenges. In this study, a plant-based waste-derived biopolymer was incorporated into unfired clay bricks to enhance their physicochemical and thermomechanical properties. The biopolymer was added at six different weight fractions (0%, 1%, 3%, 7%, 15%, and 20%) to systematically evaluate its impact on bulk density, porosity, capillary water absorption, thermal conductivity, specific heat capacity, and compressive strength. The results revealed a gradual decrease in porosity as the biopolymer content increased, leading to a 41% improvement in thermal conductivity at 20 wt%. However, the optimal balance between thermal efficiency and compressive strength was achieved at 7 wt% biopolymer; this result has been verified through a combination of experimental methods and modeling. Additionally, TRNSYS simulations confirmed the enhanced thermal performance, demonstrating a 9.74% increase in time lag and a 16% reduction in decrement factor, both of which contribute to optimizing building energy efficiency. Overall, this approach not only helps reduce environmental pollution but also enhances insulation capacity while lowering heating and cooling demands, thereby improving overall building performance. Biopolymer-reinforced unfired clay bricks thus represent a promising solution for advancing a low-carbon and sustainable construction industry, aligning with the United Nations Sustainable Development Goals (SDGs) for climate change mitigation and responsible resource management.

Keywords:

Clay–Polymer Composites; Sustainable Construction Materials; Climate Change Adaptation; Waste-Derived Additives; Circular Economy Strategies; Low-Carbon Building Technologies

References

[1] Bello, A.O., Idris, A., 2023. Strategies for Adoption of Circular Economy in the Nigeria Construction Industry. Journal of Management Science and Engineering Research. 6(2), 47–59. DOI: https://doi.org/10.30564/jmser.v6i2.5846

[2] Kadir, A.A., Salim, N.S.A., Sarani, N.A., et al., 2017. Properties of Fired Clay Brick Incorporating With Sewage Sludge Waste. In Proceedings of the 3rd Electronic and Green Materials International Conference (EGM 2017), Krabi, Thailand, 29–30 April 2017; p. 020150. DOI: https://doi.org/10.1063/1.5002344

[3] Limami, H., Manssouri, I., Cherkaoui, K., et al., 2019. Unfired Clay Bricks With Additives and Mechanical Simulation of Perforated Bricks. In Proceedings of the 2019 7th International Renewable and Sustainable Energy Conference (IRSEC), Agadir, Morocco, 27–30 November 2019; pp. 1–6. DOI: https://doi.org/10.1109/IRSEC48032.2019.9078296

[4] Sileshi, G.W., Barrios, E., Lehmann, J., et al., 2025. An Organic Matter Database (OMD): Consolidating Global Residue Data From Agriculture, Fisheries, Forestry and Related Industries. Earth System Science Data. 17(2), 369–391. DOI: https://doi.org/10.5194/essd-17-369-2025

[5] Belmakki, M., Bartali, E.H., Xiaoru, H., et al., 2015. Identification and Characterization of Organic Waste in Morocco, an Important Step Towards the Valorization of Waste. Revue Marocaine des Sciences Agronomiques et Vétérinaires. 3(3), 37–45.

[6] Kakkar, Y., Singh, R., Patel, M., 2023. Utilization of Agricultural Waste for the Sustainable Production of Clay Bricks. In Proceedings of the First Indian Geotechnical and Geoenvironmental Engineering Conference (IGGEC‑21), Punjab, India, 19–20 November 2021; pp. 349–360.

[7] Adazabra, A.N., Viruthagiri, G., 2023. Use of Waste Husk From Millet Grain Cultivation in the Production of Fired Clay Bricks. International Journal of Ceramic Engineering and Science. 5(4), e10179. DOI: https://doi.org/10.1002/ces2.10179

[8] Limami, H., Manssouri, I., Cherkaoui, K., et al., 2021. Mechanical and Physicochemical Performances of Reinforced Unfired Clay Bricks With Recycled Typha-Fibers Waste as a Construction Material Additive. Cleaner Engineering and Technology. 2, 100037. DOI: https://doi.org/10.1016/j.clet.2020.100037

[9] Dang, H.T.T., Pham, L.T.N., Pham, T.T., et al., 2023. Effect of Biowaste and Construction Waste Additives on Mechanical Dewaterability of Lake Sediment for Brick Production. Journal of the Air and Waste Management Association. 73(8), 625–637. DOI: https://doi.org/10.1080/10962247.2023.2228265

[10] Limami, H., Manssouri, I., Noureddine, O., et al., 2023. Effect of Reinforced Recycled Sawdust-Fibers Additive on the Performance of Ecological Compressed Earth Bricks. Journal of Building Engineering. 68, 106140. DOI: https://doi.org/10.1016/j.jobe.2023.106140

[11] Mayasari, D., Purwanto, B.H., Firdausijah, R.T., 2025. Proposal for the Largest Waste Management in Landfills in Indonesia for Environmental Sustainability and Public Health. Journal of Environmental and Earth Sciences. 7(3), 34–46. DOI: https://doi.org/10.30564/jees.v7i3.8109

[12] Chari, Z., Cherkaoui, E., Khamar, M., et al., 2025. Desalination Brine Discharge in Morocco. Journal of Environmental and Earth Sciences. 7(3), 166–177. DOI: https://doi.org/10.30564/jees.v7i3.8056

[13] Najim, A.S., Beddu, S., Itam, Z., 2025. Mechanical Properties of Fiber-Reinforced Self-Compacting Geopolymer Concrete Using Lightweight Aggregate Under Microwave Curing Condition. Journal of Building Materials Science. 7(3), 81–96. DOI: https://doi.org/10.30564/jbms.v7i3.9946

[14] Beniwal, A., Singh, S., Sangwan, V., et al., 2023. Chemical Constituents (Proximate, Minerals, Bioactive Compounds) of Pea [Pisum Sativum (L.)] Shells. Asian Journal of Dairy and Food Research. 1–6. DOI: https://doi.org/10.18805/ajdfr.DR-1968

[15] Patel, S.K.S., Singh, M., Kumar, P., et al., 2012. Exploitation of Defined Bacterial Cultures for Production of Hydrogen and Polyhydroxybutyrate From Pea-Shells. Biomass and Bioenergy. 36, 218–225. DOI: https://doi.org/10.1016/j.biombioe.2011.10.027

[16] Geçgel, Ü., Özcan, G., Gürpınar, G.Ç., 2013. Removal of Methylene Blue From Aqueous Solution by Activated Carbon Prepared From Pea Shells (Pisum Sativum). Journal of Chemistry. 2013(1), 614083. DOI: https://doi.org/10.1155/2013/614083

[17] Abd El-Hady, R.E., Mohamed, A.F.A., 2023. Thermal Performance Evaluation of Bio-Bricks and Conventional Bricks in Residential Buildings in Aswan City, Egypt. Scientific Reports. 13, 15993. DOI: https://doi.org/10.1038/s41598-023-42228-5

[18] Belkharchouche, D., Chaker, A., 2015. A Study on Thermo-Physical Properties of Building Materials: Concrete of Vegetable Fiber. In: Dincer, I., Colpan, C.O., Kizilkan, O., et al. (eds.). Progress in Clean Energy, Volume 2. Springer International Publishing: Cham, Switzerland. pp. 425–432. DOI: https://doi.org/10.1007/978-3-319-17031-2_29

[19] Limami, H., Manssouri, I., Noureddine, O., et al., 2023. Thermal Study of Clay Bricks Reinforced by Dry-Grass Fibers. Journal of Energy Engineering. 149(1), 04022052. DOI: https://doi.org/10.1061/JLEED9.EYENG-4613

[20] Akinyele, J.O., Oyelakin, S.K., 2021. Assessment of the Properties of Bricks Made From Stone Dust and Molten Plastic for Building and Pedestrian Pavement. International Journal of Pavement Research and Technology. 14, 771–777. DOI: https://doi.org/10.1007/s42947-020-1268-5

[21] Ona, B.J., Raghavan, S.V., Nguyen, N.S., et al., 2024. Changes in Future Rainfall Over Southeast Asia Using the CMIP6 Multi-Model Ensemble. Journal of Atmospheric Science Research. 7(2), 62–82. DOI: https://doi.org/10.30564/jasr.v7i2.6335

[22] Limami, H., Manssouri, I., Cherkaoui, K., et al., 2021. Physicochemical, Mechanical and Thermal Performance of Lightweight Bricks With Recycled Date Pits Waste Additives. Journal of Building Engineering. 34, 101867. DOI: https://doi.org/10.1016/j.jobe.2020.101867

[23] Limami, H., Manssouri, I., Cherkaoui, K., et al., 2020. Study of the Suitability of Unfired Clay Bricks With Polymeric HDPE & PET Wastes Additives as a Construction Material. Journal of Building Engineering. 27, 100956. DOI: https://doi.org/10.1016/j.jobe.2019.100956

[24] Li, H., Shi, H., He, Y., et al., 2020. Preparation and Characterization of Carboxymethyl Cellulose-Based Composite Films Reinforced by Cellulose Nanocrystals Derived From Pea Hull Waste for Food Packaging Applications. International Journal of Biological Macromolecules. 164, 4104–4112. DOI: https://doi.org/10.1016/j.ijbiomac.2020.09.010

[25] Et-Tanteny, R., El Amrani, B., Manssouri, I., et al., 2024. Physicochemical, Mechanical and Thermal Analysis of Unfired Clay Bricks: Kaolinite-PEG 6000 Composite. Cleaner Engineering and Technology. 22, 100793. DOI: https://doi.org/10.1016/j.clet.2024.100793

[26] Jannat, N., Al-Mufti, R.L., Hussien, A., et al., 2022. Influences of Agro-Wastes on the Physico-Mechanical and Durability Properties of Unfired Clay Blocks. Construction and Building Materials. 318, 126011. DOI: https://doi.org/10.1016/j.conbuildmat.2021.126011

[27] Bisht, N., Gope, P.C., Rani, N., 2020. Rice Husk as a Fibre in Composites: A Review. Journal of Mechanical Behavior of Materials. 29(1), 147–162. DOI: https://doi.org/10.1515/jmbm-2020-0015

[28] Trambitski, Y., 2024. Research of Structure and Durability of Natural Polymer Modified Clays [Doctoral Dissertation] . Vilnius Gediminas Technical University: Vilnius, Lithuania. pp. 1–126. DOI: https://doi.org/10.20334/2024-006-M

[29] Fadil-Djenabou, S., 2022. Straw Reinforced Unfired and Fired Clay Bricks for Sustainable Building Construction of Meskine Region (Far-North Cameroon). Journal of Materials and Polymer Science. 2(2), 1–7. DOI: https://doi.org/10.47485/2832-9384.1011

[30] Beniwal, A., Vikram, Savita, et al., 2022. Pea shells (Pisum sativum L.) Power: A Study on Physiochemical, In Vitro Digestibility and Phytochemicals Screening. Multilogic in Science. 12(44), 251–257.

[31] El-Sayed, A.M., Faheim, A.A., Salman, A.A., et al., 2022. Sustainable Lightweight Concrete Made of Cement Kiln Dust and Liquefied Polystyrene Foam Improved With Other Waste Additives. Sustainability. 14(22), 15313. DOI: https://doi.org/10.3390/su142215313

[32] Wang, Y., Abuel-Naga, H., 2025. Unfired Bricks From Wastes: A Review of Stabiliser Technologies, Performance Metrics, and Circular Economy Pathways. Buildings. 15(11), 1861. DOI: https://doi.org/10.3390/buildings15111861

[33] Kabir, H., Wu, J., Dahal, S., et al., 2024. Automated Estimation of Cementitious Sorptivity via Computer Vision. Nature Communications. 15(1), 9935. DOI: https://doi.org/10.1038/s41467-024-53993-w

[34] Mohammed, M., Jawad, A.J.M., Mohammed, A.M., et al., 2023. Challenges and Advancement in Water Absorption of Natural Fiber-Reinforced Polymer Composites. Polymer Testing. 124, 108083. DOI: https://doi.org/10.1016/j.polymertesting.2023.108083

[35] Turhan-Haskara, G.D., Neşeliler, P., Akgün, Y., 2025. Weather-Resistant Composite Development for Scalable Bacterial Cellulose-Based Foldable Shading Systems. In Proceedings of the ICSA 2025: 6th International Conference on Structures and Architecture, Antwerp, Belgium, 8–11 July 2025; pp.1659–1666.

[36] AlShuhail, K., Aldawoud, A., Syarif, J., et al., 2021. Enhancing the Performance of Compressed Soil Bricks With Natural Additives: Wood Chips and Date Palm Fibers. Construction and Building Materials. 295, 123611. DOI: https://doi.org/10.1016/j.conbuildmat.2021.123611

[37] Frapanti, S., Tanjung, L.E., Riza, F.V., et al., 2024. Comparison of Physical and Mechanical Properties of Traditional Bricks in Deli Serdang With No-Burn Bricks Using Rice Husk Ash. Journal of Engineering and Applied Science. 71, 143. DOI: https://doi.org/10.1186/s44147-024-00479-7

[38] Schroeder, H., 2018. The New DIN Standards in Earth Building—The Current Situation in Germany. Journal of Civil Engineering and Architecture. 12, 113–120.

[39] Abdelkader, F., Mohamed, R., Cheikh, K., et al., 2025. Improving the Structural Properties of Sustainable Earthen Construction by Incorporating Lime. Journal of Building Material Science. 7(2), 34–46. DOI: https://doi.org/10.30564/jbms.v7i2.9115

[40] Lertwattanaruk, P., Choksiriwanna, J., 2011. The Physical and Thermal Properties of Adobe Brick Containing Bagasse for Earth Construction. International Journal of Building, Interior and Landscape Technology. 1, 57–65. DOI: https://doi.org/10.14456/BUILT.2011.5

[41] Akpomie, K.G., Malloum, A., Akpotu, S.O., et al., 2024. Effect of Biomass-Based Additives on the Thermal, Physical, and Mechanical Properties of Fired Clay Bricks: A Review. International Journal of Thermophysics. 46, 5. DOI: https://doi.org/10.1007/s10765-024-03476-3

[42] Soliman, W., Ahmed, Y.M.Z., Ghitas, A., et al., 2025. Green Building Development Utilising Modified Fired Clay Bricks and Eggshell Waste. Scientific Reports. 15, 3367. DOI: https://doi.org/10.1038/s41598-025-87435-4

[43] Edomah, N., Bamigboye, A., 2025. A Review of Skills Gaps in Africa’s Waste Management Sector: A Case Study of Nigeria and Ghana. Journal of Environmental Earth Science. 7(3), 1–19. DOI: https://doi.org/10.30564/jees.v7i3.8055

[44] Toure, P.M., Dieye, Y., Gueye, P.M., et al., 2019. Experimental Determination of Time Lag and Decrement Factor. Case Studies in Construction Materials. 11, e00298. DOI: https://doi.org/10.1016/j.cscm.2019.e00298

[45] Shaik, S., Gorantla, K.K., Setty, A.B.T.P., 2016. Investigation of Building Walls Exposed to Periodic Heat Transfer Conditions for Green and Energy Efficient Building Construction. Procedia Technology. 23, 496–503. DOI: https://doi.org/10.1016/j.protcy.2016.03.055

[46] Dlimi, M., Iken, O., Agounoun, R., et al., 2018. Experimental and Numerical Investigations on the Thermal Performance of Hemp Such a Bio-Sourced Insulation Material: Application to a Moroccan Mediterranean Climate. International Journal of Engineering and Technology. 7(1), 157–164. DOI: https://doi.org/10.14419/ijet.v7i1.9090

[47] Quintaliani, C., Merli, F., Fiorini, C.V., et al., 2022. Vegetal Fiber Additives in Mortars: Experimental Characterization of Thermal and Acoustic Properties. Sustainability. 14(3), 1260. DOI: https://doi.org/10.3390/su14031260

Downloads

How to Cite

Et-Tanteny, R., Manssouri, I., Bouayad, A., Limami, H., Azzouzi, A., El Amrani, B., & El Khadiri, K. (2025). Physicochemical and Thermomechanical Performance of Eco-Friendly Unfired Clay-Biopolymer Composite Bricks. Journal of Building Material Science, 7(3), 166–182. https://doi.org/10.30564/jbms.v7i3.7994

Issue

Vol. 7 , Iss. 3 (September 2025): In Progress

Article Type

Article

License

Copyright © 2025 Rachid Et-Tanteny, Imad Manssouri, Aboubakr Bouayad, Houssame Limami, Amine Azzouzi, Bouchta El Amrani, Karim El Khadiri

Creative Commons License

This is an open access article under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License.

Crossref
Scopus
Google Scholar
Europe PMC