Effect of Substitution of Cement by Mineral Powders on the Physicomechanical Properties and Microstructure of Sand Concretes

Authors

  • Belkacem Belhadj SREML Laboratory, University Amar Telidji, BP 37 G, Laghouat, 03000, Algeria
  • Justin Houessou Research unit “EPROAD”, University of Picardie Jules Verne, Amiens, 80000, France
  • Nicolas Montrelay Research unit “EPROAD”, University of Picardie Jules Verne, Amiens, 80000, France
  • Michèle Quéneudec Research unit “EPROAD”, University of Picardie Jules Verne, Amiens, 80000, France

DOI:

https://doi.org/10.30564/jaeser.v5i4.5248

Abstract

The approach that contributes to the development of eco-materials in construction is the use of mineral powders, which can improve mechanical properties and reduce cement consumption. This article aims to study the effect of substitution by mass of cement with mineral powders on the physicomechanical properties and microstructure of sand concretes. The used mineral powders are A: the limestone, B: the natural pozzolan, C: the hydraulic lime, D: (1/3 limestone + 1/3 natural pozzolan + 1/3 hydraulic lime), and E: (1/2 natural pozzolan + 1/2 hydraulic lime). The studied percentages are 5%, 10% and 15%, in both separated and combined states. The studied properties are workability, compressive strength, the elasticity modulus in compression, shrinkage and microstructure analysis. The objective is to target the optimal percentage of the substitution of cement with mineral powders, which ensures the best compromise between the main properties of the studied sand concretes. The obtained results show that the optimal percentage is in favor of the substitution of cement by 10% D (1/3 limestone, 1/3 natural pozzolan and 1/3 hydraulic lime). Even the 15% of mineral powder D, presented similar performances compared to the sand concrete (without mineral powders). Finally, in the context of the development of eco-materials, it should be noted that the 10% D and 15% D (1/3 limestone, 1/3 natural pozzolan and 1/3 hydraulic lime) contribute to decrease the use of cement and consequently to reduce of CO2 emissions.

Keywords:

Eco-materials; Sand concretes; Cements; Mineral powders; Physico-mechanical properties; Microstructure

References

[1] Madlool, N.A., Saidur, R., Hassain, M.S., et al., 2011. A critical review on energy use and savings in the cement industries. Renewable and Sustainable Energy Reviews. 15, 2042-2060. DOI: https://doi.org/10.1016/j.rser.2011.01.005

[2] Benhelal, E., Zahedi, G., Shamsaei, E., et al., 2013. Global strategies and potentials to curb CO2 emissions in cement. Journal of Cleaner Production. 51, 142-161. DOI: https://doi.org/10.1016/j.jclepro.2012.10.049

[3] Ali, M.B., Saidur, R., Hossain, M.S., 2011. A Review on emission analysis in cement industries. Renewable and Sustainable Energy Reviews. 15, 2252-2261. DOI: https://doi.org/10.1016/j.rser.2011.02.014

[4] Escadeillas, G. (editor), 2006. Ecomaterials in construction: Challenges and prospects. Seventh Edition of the Scientific Meetings of the Group Francophone for Research and Training on Concrete (RF)2 B; 2006 Jun 19-20; Toulouse, France.

[5] Flatt, R.J., Roussel, N., Cheeseman, C.R., 2012. Concrete: An ecomaterial that needs to be improved. Journal of the European Ceramic Society. 11, 2787- 2798. DOI: https://doi.org/10.1016/j.jeurceramsoc.2011.11.012

[6] Oliveira, L.A.P., Jalali, S., Fernandes, J.M., et al., 2005. The use of metakaolin in the production of environmentally efficient concrete. Materials and Structures. 38, 403-410. DOI: https://doi.org/10.1007/BF02479308

[7] Lin, Y., Zhou, S., Li, F., et al., 2012. Utilization of municipal sewage sludge as additives for the production of eco-cement. Journal of Hazardous Materials. 213-214, 457-465. DOI: https://doi.org/10.1016/j.jhazmat.2012.02.020

[8] Weiguo, S., Mingkai, Z., Qinglin, Z., 2006. A New kind of eco-cement made of cement klin dust and granular blast furnace slag. Journal of Wuhan University of Technology—Materials Science Edition. 21 N° 1, 143-146. DOI: https://doi.org/10.1007/BF02861493

[9] Zongshou, L., Qian, Z., 2009. Strength of limestone-based non-calcined cement and its properties. Journal of Wuhan University of Technology—Materials Science Edition. 471-475. DOI: https://doi.org/10.1007/s11595-009-3471-8

[10] Makhloufi, Z., Kadri, E.H., Bouhicha, M., et al., 2012. Resistance of limestone mortars with quaternary binders to sulfuric acid solution. Construction and Building Materials. 26, 497-504. DOI: https://doi.org/10.1016/j.conbuildmat.2011.06.050

[11] Makhloufi, Z., Kadri, E.H., Bouhicha, M., et al., 2012. The strength of limestone mortars with quaternary binders: Leaching effect by demineralised water. Construction and Building Materials. 36, 171- 181. DOI: https://doi.org/10.1016/j.conbuildmat.2012.04.112

[12] Itim, A., Ezziane, K., Kadri, E.H., 2011. Compressive strength and shrinkage of mortar containing various amounts of mineral additions. Construction and Building Materials. 25, 3603-3609. DOI: https://doi.org/10.1016/j.conbuildmat.2011.03.055

[13] Burgos-Montes, O., Palacios, M., Rivilla, P., et al., 2012. Compatibility between superplasticier admixtures and cements with mineral additions. Construction and Building Materials. 31, 300-309. DOI: https://doi.org/10.1016/j.conbuildmat.2011.12.092

[14] Dif, F., Douara, T.H., Zaitri, R., et al., 2020. Effects of combined natural volcanic powders on the thermo-physical and mechanical properties of structural eco-concrete. Journal of Building Engineering. 32, 101835. DOI: https://doi.org/10.1016/j.jobe.2020.101835

[15] Zaitri, R., Bederina, M., Bouziani, T., et al., 2014. Development of high performances concrete based on the addition of grinded dune sand and limestone rock using the mixture design modelling approach. Construction and Building Materials. 60, 8-16. DOI: https://doi.org/10.1016/j.conbuildmat.2014.02.062

[16] Zaitri, R., Guettala, S., Bederina, M., 2018. Physico-mechanical properties of mortars based on the addition of dune sand powder and the recycled fines using the mixture design modelling approach. Journal of Adhesion Science and Technology. 32(15), 1613- 1628. DOI: https://doi.org/10.1080/01694243.2018.1434032

[17] Ashish, D.K., 2019. Concrete made with waste marble powder and supplementary cementitious material for sustainable development. Journal of Cleaner Production. 211, 716-729. DOI: https://doi.org/10.1016/j.jclepro.2018.11.245

[18] Baron, J., 1994. Sand concrete characteristics and use practices. Press of the National School of Bridges and Shod: Auckland.

[19] Bederina, M., Khenfer, M.M., Dheilly, R.M., et al., 2005. Reuse of local sand: Effect of limestone filler proportion on the rheological and mechanical properties of different sand concrete. Cement and Concrete Research. 35, 1172-1179. DOI: https://doi.org/10.1016/j.cemconres.2004.07.006

[20] Nécira, B., Guettala, A., Guettala, S., 2017. Study of the combined effect of different types of sand on the characteristics of high performance self-compacting concrete. Journal of Adhesion Science and Technology. 31, 1912-1928. DOI: https://doi.org/10.1080/01694243.2017.1289829

[21] Douara, T.H., Guettala, S., 2019. Effects of curing regimes on the physico-mechanical properties of self-compacting concrete made with ternary sands. Construction and Building Materials. 195, 41-51. DOI: https://doi.org/10.1016/j.conbuildmat.2018.11.043

[22] Bederina, M., Gotteicha, M., Belhadj, B., et al., 2012. Drying shrinkage studies of wood sand concrete— Effect of different wood treatments. Construction and Building Materials. 36, 1066-1075. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2012.06.010

[23] Belhadj, B., 2016. Contribution to the valorisation of local materials and waste to the formulation of insulating-carrier lightweight sand concretes intended for the construction in arid environments (Case of Laghouat city) [PhD thesis]. Laghouat: University of Laghouat, Algeria.

[24] Belhadj, B., 2007. Improved thermo-physical properties of sand concretes lightened by wood shavings in arid environments (Case of the Laghouat city) [Master’s thesis]. Laghouat: University of Laghouat.

[25] Belhadj, B., Bederina, M., Benguettache, K., et al., 2014. Effect of the type of sand on the fracture and mechanical properties of sand concrete. Advances in Concrete Construction. 2, 13-27. DOI: http://dx.doi.org/10.12989/acc2014.2.1.013

[26] Bederina, M., Marmoret, L., Mezreb, K., et al., 2007. Effect of the addition of wood shavings on thermal conductivity of sand concretes: Experimental study and modelling. Construction and Building Materials. 21, 662-668. DOI: https://doi.org/10.1016/j.conbuildmat.2005.12.008

[27] Dupain, R., Lanchan, R., Saint-Arroman, J.C., 1995. Aggregates, soils, cement and concretes. Edition Casteilla: France.

[28] Ramesh, M., Azenha, M., Lourenço, P.B., 2019. Quantification of impact of lime on mechanical behaviour of lime cement blended mortars for bedding joints in masonry systems. Construction and Building Materials. 229, 116884. DOI: https://doi.org/10.1016/j.conbuildmat.2019.116884

[29] Neville, A.M., 2000. Concrete properties, Edition Eyrolles: France.

[30] Horgnies, M., Willieme, P., Gabet, O., 2011. Influence of the surface properties of concrete on the adhesion of coating: Characterization of the interface by peel test and FT-IR spectroscopy. Progress in Organic Coatings. 72, 360-379. DOI: https://doi.org/10.1016/j.porgcoat.2011.05.009

[31] Ahmari, S., Ren, X., Toufigh, V., et al., 2012. Production of geopolymeric binder from blended waste concrete powder and fly ash. Construction and Building Materials. 35, 718-729. DOI: https://doi.org/10.1016/j.conbuildmat.2012.04.044

[32] Nozahic, V., Amziane, S., 2012. Influence of sunflower aggregates surface treatments on physical properties and adhesion with a mineral binder. Composites: Part A. 43, 1837-1849. DOI: https://doi.org/10.1016/j.compositesa.2012.07.011

[33] Ebbert, C., Grundmeier, G., Buitkamp, N., et al., 2014. Toward a microscopic understanding of the calcium-silicate-hydrates/water interface. Applied Surface Science. 290, 207-214. DOI: https://doi.org/10.1016/j.apsusc.2013.11.045

[34] Zhang, D.J., Zhao, J.H., Wang, D.M., et al., 2018. Comparative study on the properties of three hydraulic lime mortar systems: Natural hydraulic lime mortar, cement-aerial lime-based mortar and slag-aerial lime-based mortar. Construction and Building Materials. 186, 42-52. DOI: https://doi.org/10.1016/j.conbuildmat.2018.07.053

[35] Szostak, B., Golewski, G.L., 2021. Rheology of cement pastes with siliceous fly ash and the CSH nano-admixture. Materials. 14, 3640. DOI: https://doi.org/10.3390/ma14133640

[36] Makhloufi, Z., Bouziani, T., Hadjoudja, M., et al., 2014. Durability of limestone mortars based on quaternary binders subjected to sulfuric acid using drying-immersion cycles. Construction and Building Materials. 71, 579-588. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2014.08.086

Downloads

How to Cite

Belhadj, B., Houessou, J., Montrelay, N., & Quéneudec, M. (2022). Effect of Substitution of Cement by Mineral Powders on the Physicomechanical Properties and Microstructure of Sand Concretes. Journal of Architectural Environment & Structural Engineering Research, 5(4), 18–29. https://doi.org/10.30564/jaeser.v5i4.5248

Issue

Vol. 5 , Iss. 4 (October 2022)

Article Type

Article
Crossref
Scopus
Google Scholar
Europe PMC