View Vol. 3 ,  Iss. 4 (October 2020): Special Issue

Journal of Architectural Environment & Structural Engineering Research

ISSN: 2630-5232 (Online)

Vol. 3 , Iss. 4 (October 2020): Special Issue

  • Editorial

    Special Issue on “Analysis on Structural Performance”

    Huaping Wang

    Article ID: 2617    DOI:
    254  (Abstract) 62  (Download)

    Abstract: Structural performance is the most important index to declare the stability, safety and durability of structures in practical engineering. The performance degradation of structures becomes more and more common with the increase of service life. To ensure the safe operation of structures, the hot research has gradually changed from large-scale construction to the detection, repair,... More

  • Article

    Interfacial Interaction of CFRP Reinforced Steel Beam Structures

    Huaping Wang, Heng-Yang Li, Si-Yuan Feng, Tao Song

    Article ID: 1967    DOI:
    279  (Abstract) 64  (Download)


    Due to the increase of service life, the phenomenon of performance degradation of bridge structures becomes more and more common. It is important to strengthen the bridge structures so as to restore the resistance level and extend the normal service life. Carbon fiber reinforced polymer (CFRP) materials are thus used for the assembly reinforcement of... More

  • Article

    Structural Performance of Smart CFRP-FBG Reinforced Steel Beams

    Huaping Wang, Tao Song, Heng-Yang Li, Si-Yuan Feng

    Article ID: 2035    DOI:
    278  (Abstract) 46  (Download)


    Many beam structures suffer from gradual performance degradation with the increase of service life. To recover the bearing capacity of these beams, carbon fiber reinforced polymer (CFRP) plates are developed to attached on the beam bottom. To check the structural performance of the CFRP reinforced beams, smart CFRP plate with FBGs in series is designed... More

  • Article

    Motion Analysis of PLET during the Setting-Down Process

    Hu Li, Ming Xian Wang

    Article ID: 2542    DOI:
    222  (Abstract) 51  (Download)


    The design analysis of Subsea PLET should consider various cases, including in-place analysis, lifting analysis, setting down analysis and so on. The size and vessel space should be checked in the structural design, and the fishing protection function should also be covered. The accurate setting-down process is the prerequisite for the successful construction of the... More

  • Article

    Analytical Model of Nonlinear Semi-rigid Frames Using Finite Element Method

    Shahrin Mohammad, Ahmad Baharuddin Abd Rahman, Cher Siang Tan, Yeong Huei Lee

    Article ID: 2593    DOI:
    284  (Abstract) 59  (Download)


    Performance-based design for a constructional steel frame in nonlinear-plastic region requires an improvement in order to achieve a reliable structural analysis. The need to explicitly consider the nonlinear behaviour of structures makes the numerical modelling approach much more favourable than expensive and potentially dangerous experimental work. The parameters considered in the analysis are not limited... More