Computerized FDTD Method for Longitudinal Optical Phonon Energy on Semiconductor Hybrid Structure for High Power Devices Fabrication

Authors

  • Phyo Sandar Win Department of Electronic Engineering, Technological University (Taungoo), Bago, Myanmar
  • Hsu Myat Tin Swe Department of Electronic Engineering, Technological University (Taungoo), Bago, Myanmar
  • Hla Myo Tun Faculty of Electrical and Computer Engineering, Yangon Technological University, Yangon, Myanmar

DOI:

https://doi.org/10.30564/jcsr.v3i2.3139

Abstract

The research problem in this study is the longitudinal optical phonon energy on metal/semiconductor interface for high performance semiconductor device. The research solution is to make the software model with finite difference time domain (FDTD) solution for transmission and reflection pulse between metal and semiconductor interface for carrier dynamics effects. The objective of this study is to find the quantum mechanics understanding on interface engineering for fabricating the high performance device for future semiconductor technology development. The analysis was carried out with the help of MATLAB. The quantum mechanical spatial field on metal-semiconductor stripe structure has been analyzed by FDTD techniques. This emission reveals a characteristic polar radiation distribution of electric dipoles and a wavelength independent of the structure size or the direction of emission; consequently, it is attributed to thermally generate electric dipoles resonating with the longitudinal optical phonon energy. Phonon energy occurs lattice vibration of material by the polarization of light, if the material has rigid structure reflect back the incident light. So, high reflective metal-semiconductor structure always use as photodectors devices in optical fiber communication. No lattice vibration material structure has no phonon effect, so this structure based devices can get high performance any other structure based devices. The transmission and reflection coefficient of metal-semiconductor GaN/Au layer structure compare with GaN/Ti and GaN/Pt structure. Parallel (P) and transverse (S) polarization of light incident on a metal-semiconductor nanolayer structure with IR wavelength. Efficient use of the layer by layer (LbL) method to fabricate nanofilms requires meeting certain conditions and limitations that were revealed in the course of research on model systems.

Keywords:

FDTD, Semiconductor structure, Computer simulation, Computer programming, MATLAB

References

[1] Lee, Y. S. 2009. “Principles of Terahertz Science and Technology.”

[2] Jacobsen, F.2008. “An Efficient Realization of Frequency Dependent Boundary Conditions in an Acoustic Finite-Difference Time-Domain Model.” vol. 316: 234-247.

[3] Chatterjee, S.2004. “Excitonic Photoluminescence in Semiconductor Quantum Wells: Plasma versus Excitons.” Physical Review Letters, vol.92, issue.6.

[4] Koch, S. W. 2011. “Semiconductor Quantum Optics.” Cambridge University Press.

[5] Li, W. 2006. “Post Growth Thermal Annealing of GaN Grown by RF Plasma.” Journal of Crystal Growth, vol.227 : 415-419.

[6] Khromov, S. 2013. “Doping Effects on the Structural and Optical Properties of GaN.” Science and Technology Dissertation, no. 1554, Sweden: Thin Film Physics.

[7] Bengtsson, M. 2008. “Finite Difference Time-Domain Simulations of Exciton-Polariton Resonances in Quantum Dot Arrays.” Optical Society of America, vol.16, no. 7 : 4507-4519.

[8] Lee, Y. S. 2009. “Principles of Terahertz Science and Technology.”

[9] Moini, M. 2008. “On the Numerical Solution of One Dimensional Schrödinger Equation with Boundary Conditions Involving Fractional Differential Operators.” International Journal of Engineering Science, vol.19 : 21-26.

Downloads

How to Cite

Win, P. S., Swe, H. M. T., & Tun, H. M. (2021). Computerized FDTD Method for Longitudinal Optical Phonon Energy on Semiconductor Hybrid Structure for High Power Devices Fabrication. Journal of Computer Science Research, 3(2), 39–51. https://doi.org/10.30564/jcsr.v3i2.3139

Issue

Article Type

Article